精密切割设备
your current location : Home >> News >> Industry News

ContactContact Us

Tangshan Jingyu Technology Co., Ltd.

Tangshan Jingyu Technology Co., Ltd.

Address: Yutai Industrial Park, Yutian County, Tangshan City, Hebei Province

Phone: 0315-6578888

Fax: 0315-6577593

Marketing Department Email: saler@tsjingyu.com

Comprehensive Office Email: tsjingyu@163.com

Website:en.tsjingyu.com

Method for adjusting speed of multi-wire cutting machine

2020-03-10 15:54:07
Times

For the operation process of the wire cutting machine tool, everyone who learns the CNC extra bed must be skilled. Today, the editor of the multi-wire cutting machine manufacturer introduces to you the method of adjusting the gap in the operation of the multi-wire cutting machine tool.


The method of speed regulation is: after selecting the pulse width and pulse interval, after putting in the number of tubes, observe the voltmeter and ammeter of the pulse source. The adjustment of the frequency conversion speed will make the value of the meter fluctuate within a certain range. In the small range, the adjustment follow-up will be more sensitive, and the adjustment in the fast direction will be more sluggish. It is more suitable to be placed at the junction of sluggishness and sensitivity. It can also be said that when it is adjusted to a position that is not sensitive enough but can still be processed normally, it will be slightly adjusted back.


We are referring to ordinary materials, which are normally thick and thin. For some special materials or ultra-thick processing, the frequency conversion adjustment should be targeted. For materials with low conductivity, in addition to increasing the amplitude of the high-frequency source, the sampling start voltage should be increased and the tracking should be loosened. The processing of large thickness should also make the frequency conversion speed slightly slower, and it is better to have some no-load pulses, but also give enough time to clean the gap and restore the insulation. If the tracking is too tight, the discharge gap will be reduced to a certain extent, and the plated black and white stripes will be lighter, but only the black and white colors are light, and the finish is not good. Because the pits and commutation stripes are the same, but it is easier to short circuit. If the wire is loose or the tension is uneven, resulting in overfeed and short circuit for a long time, the finish and efficiency will be lost.


Tangshan Jingyu Technology Co., Ltd. is mainly engaged in the research and development, design and production of multi-wire cutting machine equipment. It constantly improves and innovates in the course of operation. The company starts from market demand and aims at creating value for customers, reducing product operating costs and ensuring products. Quality, improve the cost-effectiveness of products, are favored by our customers


多线切割机调速的方法

Tags

Recently Viewed:

ContactContact us
Welcome to inquire

0315-6578888   

Tangshan Jingyu Technology Co., Ltd.

Address: Yutai Industrial Park, Yutian County, Tangshan City, Hebei Province

Phone: 0315-6578888

Fax: 0315-6577593

Marketing Department Email: saler@tsjingyu.com

Comprehensive Office Email: tsjingyu@163.com