On December 2, the sapphire multi-wire cutting machine of Tangshan Jingyu Technology Co., Ltd. won the China Industrial Design Supreme Award-2016 China Industrial Design Award. It is reported that only 9 units nationwide have won awards, including 8 product awards and 1 concept award, including 4 in Shandong, 1 in Shaanxi AVIC, 1 in Hebei, 1 in Jiangsu, 1 in Shanghai, 1 in Guangdong.

Tangshan Jingyu Technology Co., Ltd. is an innovative technology enterprise specializing in the research, development, production and sales of CNC multi-wire cutting machines, precision cutting machines, and magnetic material cutting. Multi-wire cutting machines are mainly used in sapphire, rare earth permanent magnet materials, photovoltaics, electronics, Wind power, automobile and other industries. With the rapid development of the solar energy and sapphire material industry, the demand for silicon wafers and sapphire wafers is increasing, and the accuracy requirements are getting higher and higher. CNC multi-wire cutting is replaced by its high precision, high efficiency, and low loss. The traditional inner circle cutting has become the main method of silicon wafer and sapphire cutting. At present, the technical parameters of the product have been applied as a local industry standard in Hebei Province, and the standard has been included in the industry standard plan of the Ministry of Industry and Information Technology. .

YBDX160 diamond wire multi-wire cutting machine is mainly to meet the needs of sapphire production and processing enterprises for sheet cutting of sapphire rods

main feature:

1. The equipment has a precision temperature control system, high slicing accuracy, small warpage, stable slicing quality, and low cutting cost.

2. With swinging cutting function, suitable for processing high hardness and brittle materials such as sapphire. The equipment is easy to operate and easy to maintain.

3. The equipment uses load sensors to measure the tension of the supply and take-up side; the tension control adopts closed-loop feedback control to ensure the constant tension of the cutting line during the cutting process.

4. With disconnection monitoring, alarm and host automatic emergency stop, coolant temperature monitoring and automatic alarm function.

5. The equipment can set process parameters such as large routing speed, acceleration / deceleration routing time, reciprocating cycle, swing angle and speed, and table moving speed. The process adjustment is convenient.

6. The device can display the length of the cutting wire, set the coolant temperature, display the cutting time and the remaining cutting time, display the remaining wire length, display the current cutting and winding process.

7. With tension early warning function, to effectively avoid wire breakage caused by abnormal tension fluctuations.

8. Upside-down cutting, slicing scraps and fragments directly fall into the splice box, effectively avoiding the risk of wire breakage.

9. Using water solvent cutting fluid, easy to clean, green and environmentally friendly.

10. With a power-off delay shutdown function.